Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Radina Tau - Radio and IP transmitter
Radina Tau is a communication device with the main purpose to transmit data from security panels and/or sensors through UHF radio channel and/or IP based network. Combining the advantages of those two advanced communication technologies Radina Tau provides the most secure connection with monitoring center using various ways of back-up – 1 main and up to 4 back-up UHF radio frequencies and up to 2 IP servers.
  • Power supply 12VDC (8,5V to 16V)
  • Low power consumption – 0,08А under normal operation and from 0,9 to 1,5А when transmitting through radio channel
  • Frequency range – from 400MHz to 470MHz
  • RF Output power – 5-6W in the whole RF range
  • Bandwidth – 12,5KHz
  • One main and up to four back-up frequencies
  • Configurable parity check, RF messages repeat count, RF test repeat count, repeat count in a single message, test period and "repeat until restore" period
  • Usage of a Smart Test to reduce radio transmitting
  • Network interface - IEEE 802.3 Ethernet, Fully Compatible with 10/100/1000Base-T Networks
  • Static or dynamic IP address compatible with DHCP server
  • Capability to use one or two fully independent IP servers
  • Encrypted connection with IP servers
  • Verification with an unique ID code
  • HTML server for easy configuration and status check, protected with an username and a password
  • Capability to change the username and password of the html server
  • Six digital inputs working simultaneously with RF and IP transmitters
  • Capability every digital input separately to be set to transmit on backup RF frequency
  • Capability every digital input separately to be set to re-transmit RF message over a period of time until it is in alarm state
  • Configurable working mode for every digital input:
    • Normal Open
    • Normal Close
    • Check for AC voltage from 5V to 20V
    • Deactivated
  • Configurable parameters sent for events on each digital input to IP servers
  • Indication (4 LEDs) for:
    • Radio LED – Radio transmitter status
    • LAN Status - Ethernet available
    • LAN Activity - Network packets service
    • IP Server LED - IP transmitter status
  • Test button